Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Centre Grille on a Ford Ranger

Model: Ford Ranger - Years: 2015, 2016, 2017, 2018, 2019
Part: Trim cover

See other generations:
Video tutorial

Learn how to remove and replace the front centre grille on a Ford Ranger. Prepare to remove the plastic grille: remove the plastic rivets with a screwdriver, then unscrew the nuts securing the grille (located on the inside of the bumper) with a socket wrench.

Use a plastic lever to pry between the grille and the bumper until it detaches from its housing. Once the grille is detached, remove it from the bumper and fit a new one. Reassemble the grille onto the vehicle's bumper by pressing it into place and tightening the nuts.

Check the correct installation of the removed parts.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Remove the Grille on a Ford Ranger
Ford Ranger (2015-2019 / ) In this video, learn how to remove the grille located on the front bumper of a Ford Ranger. Prepare to take off the plastic grille: use a socket span…
Replacement of the front bumper grille of the Ford Ranger
Replacement of the front bumper grille of the Ford Ranger
Ford Ranger (2022-2026 / RA, P703) In this short guide we will see the instructions that will allow us to disassemble and replace the front bumper grille of the Ford Ranger. First, we …
How to open the hood of the Ford Ranger
How to open the hood of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) In a few simple steps, we will see how to open the hood of the Ford Ranger, following the instructions below. First, open the front driver's side doo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos