Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Spark Plugs from Your Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Spark plugs

See other generations:
Video tutorial

Want to remove the spark plugs from your Ford Ecosport? Let’s see in detail how to proceed. Pull the lever to open the engine compartment located at the bottom left of the dashboard and lift the front bonnet, securing it. Unscrew the securing bolts of the coils using a socket wrench: take the wrench in hand and twist it until you extract it from the cylinder head.

Use a socket wrench to unscrew the spark plugs (remove them from the cylinder head) and take the new spark plug, inserting it into the cylinder head with the socket wrench. Finally, refit the plastic cover panel over the cylinder head.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs in a Ford EcoSport?
How to Replace the Spark Plugs in a Ford EcoSport?
Ford Ecosport (2012-2023 / BK, MK 1) As you can see in this tutorial, replacing the spark plugs in a Ford EcoSport is a very simple and quick operation. First, wait for the engine to be …
How to Disable the Start&Stop on the Ford Ecosport?
How to Disable the Start&Stop on the Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) To disable the Start&Stop on the Ford Ecosport, insert the ignition key into the ignition switch: once the dashboard is powered on, navigate through …
How to Reset the Service Light on the Ford Ecosport
How to Reset the Service Light on the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) In today's video, you will see how to reset the service light on the Ford Ecosport after performing a service. This light comes on once the service i…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos