Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fuel filter in a Ford Transit 2.2 TDCI?

Model: Ford Transit MK 7 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Diesel fuel filter

See other generations:
Video tutorial

Changing the fuel filter on a Ford Transit 2.2 TDCI is not complicated, but it requires a bit of patience and attention. First, disconnect the battery for safety, then locate the filter: it is usually located near the front passenger side wheel or under the hood.

Loosen the clamps and disconnect the diesel pipes, being careful of any splashes. Unscrew the old filter and install a new one, making sure it is securely tightened and the gaskets are in place.

Reconnect everything, repressurize the system by pumping the primer if necessary, or start the engine and let it run for a few minutes. If it starts on the first try, you're good to go. Always watch out for any leaks.

If you don't feel comfortable doing it yourself, contact an experienced mechanic.


Posted on 13 October 2025 by ScegliAuto


Related tutorials

How to replace the diesel filter of the Ford Transit 2.2 TDCi
How to replace the diesel filter of the Ford Transit 2.2 TDCi
Ford Transit (2014-2024 / MK 8) The instructions in this guide will show us how to disassemble and replace the diesel fuel filter of the Ford Transit 2.2 TDCi. First, lift the vehic…
Replacing the Diesel Filter of the Ford Transit 2.2 TDCi
Replacing the Diesel Filter of the Ford Transit 2.2 TDCi
Ford Transit (2014-2024 / MK 8) Today, discover the steps that will allow you to remove and replace the diesel filter cartridge of the Ford Transit 2.2 TDCi. First, lift the vehicle…
Replacing the Air Filter on the Ford Transit TDCi
Replacing the Air Filter on the Ford Transit TDCi
Ford Transit (2006-2014 / MK 7) In this guide, follow the instructions to remove and replace the engine air filter on the Ford Transit TDCi. First, open the bonnet of the vehicle an…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos