Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part:

To reset the tire pressure warning light on a Ford Kuga vehicle, we need to press the OK button and access the settings menu. The OK button is located on the left side of the steering wheel, and by holding it down we can access all the settings options for the car. However, it is only by pressing the TPMS monitor option that we can access the tire pressure settings. Hold down the button for a few seconds on this option to update the tire pressure. If the tire pressure is not updated upon restarting the instrument panel, it will be necessary to check the tire sensors.

Posted on 28 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS warning light of the 2018 Ford Kuga
How to reset the TPMS warning light of the 2018 Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) If the TPMS light on the instrument panel of your 2018 Ford Kuga continues to stay on despite there being no punctures or pressure loss in any of the…
How to reset the service light on the Ford Kuga
How to reset the service light on the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Today we will explain how to reset the service light on a Ford Kuga vehicle. We remind you that before performing the steps related to resetting the …
How to Reset the TPMS Light on the Ford Kuga
How to Reset the TPMS Light on the Ford Kuga
Ford Kuga (2020-2026 / MK 3) .. In today's video, see how to reset the TPMS light on the Ford Kuga. First, check the tyre pressures and ensure they match the.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to reset the tire warning light in Ford Kuga? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos