Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Service warning light

In this very short video tutorial today, we will see the entire procedure necessary to reset the service light on a Ford Focus, third series model produced from 2011 to 2018. This operation is very simple and can be done independently in just a few seconds. So let's start the procedure by turning on the vehicle's ignition in the first position, then press and hold down both the brake and accelerator pedals simultaneously for about 15-20 seconds, until the notification of the completed engine oil reset is shown in the video.

Posted on 13 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Ford Focus
How to reset the service light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will explain how to reset the service light on Ford Kuga, Ford Mondeo, Ford Fiesta, and Ford Focus vehicles. Specifically, today we will see…
How to reset the service light on the Ford Focus model 3
How to reset the service light on the Ford Focus model 3
Ford Focus (2011-2018 / MK 3) Today we will see how to reset the service light of Ford Focus vehicles produced from 2016 to 2018. To reset the light, we need to press the accelera…
Service reset on a Ford Focus
Service reset on a Ford Focus
Ford Focus (2011-2018 / MK 3) In this brief video guide, the step-by-step procedure for resetting the service light on a Ford Focus, third generation model produced from 2011 to 2…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos