Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on the Ford Escape 1.6

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

Follow the instructions on how to remove and replace the timing belt on the Ford Escape 1.6. In this case, the engine block is already removed from the frame; now remove the timing cover and the crankshaft pulley, as shown in the video. At this point, take the necessary references for replacing the timing belt by loosening the tensioner with a wrench; remove the old timing belt and install the new original one. Replace the water pump kit if necessary, then reassemble the engine block.


Posted on 2 February 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Ford Escape?
How to Replace the Timing Belt on a Ford Escape?
Ford Escape (2013-2019 / MK 3) To replace the timing belt on a Ford Escape, loosen the screws that secure the side cover of the engine block to access the underlying components: he…
Where to Find the OBD Port on a 2005 Ford Escape
Where to Find the OBD Port on a 2005 Ford Escape
Ford Escape (2001-2007 / MK 1) Finding the OBD port in your first-generation 2005 Ford Escape is very simple, and with the following guide, you will have no difficulty. First, ensu…
How to Replace the Cabin Filter in the Ford Escape
How to Replace the Cabin Filter in the Ford Escape
Ford Escape (2008-2012 / MK 2) Replacing the cabin filter in the Ford Escape, as shown in this tutorial, is a very simple and quick task. First, open the hood, then locate the clip…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos