Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel from the Ford S-Max

Model: Ford S Max MK 1 - Years 2006-2016
Part: Steering wheel

Today we will see the steps to remove and replace the steering wheel and its airbag from the Ford S-Max. First, get inside the cabin and start by unclipping and removing the airbag from the steering wheel, unclipping the internal clips (inserting a flat screwdriver into the rear holes); then disconnect the electrical connector, as shown in the video. At this point, unscrew the central screw of the steering wheel using a socket wrench with an extension, removing the steering wheel; replace it if necessary with the new one, remounting it correctly in position, and finally install the airbag.

Posted on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the steering wheel and airbag on Ford S Max
Removing the steering wheel and airbag on Ford S Max
Ford S Max (2006-2016 / MK 1) On the protective casing behind the steering wheel there are two slots on the side: insert a small flat screwdriver in these slots, opening the hooks…
How do you reset the tire pressure warning light on the Ford S-Max?
How do you reset the tire pressure warning light on the Ford S-Max?
Ford S Max (2016-2024 / MK 2) In order to reset the tire pressure warning light of the Ford S-Max, you need to turn on the instrument panel and navigate inside using the arrow but…
Removing the rear light on Ford S-max
Removing the rear light on Ford S-max
Ford S Max (2006-2016 / MK 1) Today we will see how to disassemble the rear light and how to replace the bulbs on a Ford S-max, following these simple steps. First of all we open …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos