Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. S Max
    4. : Removing the steering wheel and airbag on Ford S Max

Ford S Max - Video tutorial

Model: Ford S Max MK 1 - Years 2006-2016
Part: Airbags
Operation: Removing the steering wheel and airbag on Ford S Max

On the protective casing behind the steering wheel there are two slots on the side: insert a small flat screwdriver in these slots, opening the hooks and consequently removing the plastic itself. Now access the rear part of the steering wheel itself and repeat an operation similar to the previous one: insert the flat screwdriver again in the rear slots, this time on the steering wheel, hitting the tabs until you notice that the airbag will come out of its seat. At this point, just disconnect the connector and that's it. Obviously, proceed backwards for the assembly.


Posted on 5 January 2024 by ScegliAuto



Guide to replacing the timing belt of the Ford S-Max.
Ford S Max (2016-2024 / MK 2) The main institutions today will show us how to dismantle and replace the timing belt of the Ford S-Max. First, we open the car's engine hood and sta
How do you reset the tire pressure warning light on the Ford S-Max?
Ford S Max (2016-2024 / MK 2) In order to reset the tire pressure warning light of the Ford S-Max, you need to turn on the instrument panel and navigate inside using the arrow but
How do you replace the timing belt on a Ford S-Max?
Ford S Max (2006-2016 / MK 1) In order to replace the timing belt on the Ford S-Max, you need to go and open the bonnet, so that you have access to the components inside the engin

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos