Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on a Ford Kuga MK1

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

This reset procedure is correct not only for the Ford Kuga MK1 but for most Fords of that era: turn on the ignition, press the accelerator pedal fully and hold it down; then press the brake pedal fully and hold it down at the same time as the accelerator.

Keep both pedals pressed for 10 to 15 seconds; a service message will appear on the display saying 'oil service reset completed'. At that point, you can release both pedals.

Turn off the ignition, wait a moment, and turn it back on to verify that the service light is now actually off.


Posted on 1 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light (Engine Oil) on the Ford Kuga MK1
How to Reset the Service Light (Engine Oil) on the Ford Kuga MK1
Ford Kuga (2008-2012 / MK 1, C394) Discover the instructions on how to reset the service light for the regular maintenance oil change on the first generation Ford Kuga, in simple and q…
How to Reset the Service Light on the Ford Kuga?
How to Reset the Service Light on the Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) In today's tutorial, discover how to reset the expired service warning on the second generation Ford Kuga; this video also applies to other contempor…
How to reset the service light in the Ford Kuga?
How to reset the service light in the Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) In this tutorial, you will see how to reset the service light in the Ford Kuga, applicable for both oil and general service. This procedure should on…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos