Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light in the Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Service warning light

In this tutorial, you will see how to reset the service light in the Ford Kuga, applicable for both oil and general service. This procedure should only be followed after completing the scheduled maintenance. Turn on the instrument cluster, not the engine, and simultaneously press the brake pedal and accelerator. Continue holding the pedals for about 20 seconds or until the display confirms the reset. Release the pedals, switch off and then on the ignition again to verify that the procedure was successful.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) This guide explains how to independently reset the service light related to the service interval on a Ford Kuga vehicle. To reset the service light, …
How to Reset the Service Light on Ford Kuga
How to Reset the Service Light on Ford Kuga
Ford Kuga (2020-2026 / MK 3) Learn how to reset the service light on a Ford Kuga MK3: ensure all doors, the tailgate, and the bonnet are closed. Then turn on the ignition and pul…
How to Reset the Service Light on a Ford Kuga
How to Reset the Service Light on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) When your Ford Kuga indicates, with the activation of the specific light, that it is time for an oil and filter change, it alerts you to perform the …

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos