Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Malfunction Light on the Ford Focus 2013

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

The procedure shown in the video does not technically erase the engine light, but only clears the warning message, so if the problem is not resolved, the warning will return. The procedure is as follows: press the brake pedal and the accelerator pedal simultaneously, both fully.

Turn the key twice, bringing it to the "ON" position twice in succession without starting the engine. During this operation, keep the pedals pressed, and continue holding them until the message "service set" or "oil complete" appears on the display: Press "ok" on the steering wheel to confirm and the message will disappear.

If the message "Engine malfunction service now" is accompanied by the yellow engine light (check engine light) being on, it means there is a stored error code. In that case, the procedure does not resolve the issue: a diagnostic scanner is needed to read the code and repair the fault.

The 2013 Focus (Mk3) is known for false alarms related to oil pressure sensors or electronic actuator issues. If the message returns after the reset, have the vehicle checked by a mechanic.


Posted on 9 June 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Fault Light on a Ford Focus
How to Reset the Engine Fault Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) In this video, you will see how to reset the engine fault light on a Ford Focus. The model in question does not have controls on the steering wheel, …
How to reset the engine malfunction indicator light on the Ford Focus?
How to reset the engine malfunction indicator light on the Ford Focus?
Ford Focus (1998-2004 / MK 1) In this tutorial, we can see how to reset the engine malfunction light in the Ford Focus, an extremely simple and quick operation. To do this, we wil…
Replacing the Engine Oil Pressure Sensor on a Ford Focus 2.0L
Replacing the Engine Oil Pressure Sensor on a Ford Focus 2.0L
Ford Focus (2011-2018 / MK 3) In this guide, discover the instructions to remove and replace the engine oil pressure sensor on a Ford Focus 2.0L. First, locate the oil pressure se…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What does the airbag warning light on Ford Focus indicate? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos