Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : How to remove the door panel of a Ford Focus Sw

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Door panel
Operation: How to remove the door panel of a Ford Focus Sw

Let's see how to remove the left rear door panel of a Ford Focus Sw. Disconnect the battery terminals in the engine compartment, unscrew the screws located in the space of the upper lever of the door opening with a screwdriver and remove the plastic covering the handle; unscrew the screws on the door panel and remove the clips for tightening it. We detach the panel with our hands (we disconnect the power supply cables and the opening cable). We remove the adhesive coating and carry out maintenance on the inside. We replace the door panel and reassemble everything by proceeding backwards.


Posted on 19 November 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos