Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Diesel Filter on a Ford S Max

Model: Ford S Max MK 1 - Years 2006-2016
Part: Diesel fuel filter

Learn how to remove the diesel filter on a Ford S Max. Lift the engine bonnet and locate the diesel filter (as shown in the video). Using a large screwdriver, unscrew the bolt securing it (you can also use a spanner) near the container where the diesel filter is located. Once the filter is removed, take it out of the vehicle (replace it with a new filter). Finally, refit the filter into the associated diesel filter container (connect the pipes and electrical terminals) and tighten the appropriate bolts. Close the front bonnet after assembly.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Ford S-Max 2.0 TDCi
How to Replace the Fuel Filter on a Ford S-Max 2.0 TDCi
Ford S Max (2006-2016 / MK 1) In this video, we will see the steps to remove and replace the fuel filter on a Ford S-Max 2.0 TDCi, but also on the Galaxy and Ford Kuga with the sa…
Replacing the Diesel Filter on a Ford S-Max 2.0 TDCi
Replacing the Diesel Filter on a Ford S-Max 2.0 TDCi
Ford S Max (2006-2016 / MK 1) In this video tutorial, you will see how to remove and replace the diesel filter on a Ford S-Max 2.0 TDCi. First, open the engine bonnet and remove t…
How to Replace the Timing Belt on the Ford S-Max 2.0 TDCI
How to Replace the Timing Belt on the Ford S-Max 2.0 TDCI
Ford S Max (2006-2016 / MK 1) Today's guide will show you how to remove and replace the timing belt on the Ford S-Max 2.0 TDCI. First, lift the vehicle and start by removing the f…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos