Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Ford Fusion

Model: Ford Fusion MK 1 - Years 2002-2012
Part: Engine oil

Today, this short video will show you how to change the engine oil and oil filter on your Ford Fusion. It is not a very complex operation; just take some care, and you can do it without needing a specialist. First, remove the oil filler cap (to avoid creating a vacuum when you remove the oil drain plug). Now, proceed to remove the oil drain plug (place a container under your Ford Fusion to catch the oil). Meanwhile, remove the oil filter using a ratchet and replace it with a new one. After ensuring all the old oil has drained, you can refit the drain plug and proceed to top up with new oil.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Pollen Filter on a Ford Fusion
How to Replace the Pollen Filter on a Ford Fusion
Ford Fusion (2002-2012 / MK 1) How to replace the pollen filter on a Ford Fusion? Here’s how to do it: use a plastic lever to detach the cover located at the bottom of the centre t…
How to Replace the Cabin Filter in the Ford Fusion?
How to Replace the Cabin Filter in the Ford Fusion?
Ford Fusion (2002-2012 / MK 1) In this tutorial, you will see how to replace the cabin air filter in the Ford Fusion, a very simple and quick operation. First, position yourself in…
How to replace the cabin filter on the Ford Fusion?
How to replace the cabin filter on the Ford Fusion?
Ford Fusion (2002-2012 / MK 1) To replace the cabin filter on the Ford Fusion, you need to detach the rivet that secures the protection panel on the passenger side footwell: once t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos