Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuel pump

See other generations:
Video tutorial

You need to replace the fuel pump if it no longer works. Here’s how to remove it. Open the rear hatch, remove the rear seats, and unscrew the securing screws of the cap that covers the access to the tank (use a socket).

Remove the metal cap and locate the fuel pump. Unscrew the plastic nut that secures the fuel pump, disconnect the fuel lines and clamps.

Extract the pump from inside the tank. Install the new pump, connect the clamps and lines, and tighten with the nut. Close the metal panel with the cap.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Pump from a Ford Fiesta
How to Remove the Fuel Pump from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How to remove the fuel pump from a Ford Fiesta? First, disconnect the battery cables and lift the car on a column lift. Use a socket spanner to undo …
How to Remove the Fuel Pump on a Ford Fiesta
How to Remove the Fuel Pump on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How to remove the fuel pump on a Ford Fiesta? Start by disconnecting the battery cables, then remove the rear seat cushions of the car. Use a socket …
How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo
How to Replace the Fuel Pump on the Ford Fiesta - Ka - Mondeo
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) In this guide, we will cover the main instructions on how to remove and replace the fuel pump on the Ford Fiesta, as well as the Ka and Mondeo. First…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - Where is the Ford Fiesta fuel pump located? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos