Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Front Door Panel

Model: Ford Ranger MK 2 - Years 1993-1997
Part: Door trim panel

Remove the screws located on the opening handle using a Torx spanner. Remove the armrest by taking out the screws positioned lower down. Dismantle the window winder. Unscrew all the screws around the panel to access additional fixing screws. Unscrew the screws securing the pillar cover and remove it. Some screws are hidden under plastic caps that need to be removed using a plastic tool to avoid damaging the panel. Pull the panel to release all the plastic clips. Carefully slide the panel upwards to disengage other clips. Disconnect the speaker wires and other services. You now have access to the internal components.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Ford Ranger
How to Remove the Door Panel of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) Below, we will discover the instructions that will allow us to remove the door panel of the Ford Ranger. First, open the front door of the vehicle an…
How to disassemble the front door panel of the Ford Ranger
How to disassemble the front door panel of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) The following steps will show us how to disassemble and remove the front door panel of the Ford Ranger. First, we open the front door of the vehicle …
How to Remove the Front Door Panel of the Ford Ranger
How to Remove the Front Door Panel of the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) In this brief and simple guide, follow the instructions to remove and replace the front door panel of the Ford Ranger. First, open the front door and…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos