Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Spark Plugs on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Spark plugs

Replace the spark plugs on a Ford Fiesta if they are damaged. Here’s how to remove them from inside the engine bay. Remove the soundproofing panel covering the engine, and take off the coils on the cylinder head (unscrew the securing screws); then unscrew the spark plugs with a socket wrench and pull them out of the cylinder head. Take the new spark plugs and guide them with the extension of the socket wrench into the cylinder head, tighten them and connect the power coils to each spark plug with the new leads. Finally, close the engine bonnet and test the correct operation of the car.

Updated on 19 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing Spark Plugs on Ford Fiesta
Replacing Spark Plugs on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replacing the ignition spark plugs on a Ford Fiesta. Remove the components in the engine bay to access the spark plugs. Remove the soundproofing pane…
Replacing Spark Plugs on a Ford Fiesta
Replacing Spark Plugs on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Replacing damaged spark plugs? Here’s how to remove them from the engine bay of the Fiesta. Remove the soundproofing panel covering the engine (if pr…
How to Replace the Spark Plugs on a Ford Fiesta
How to Replace the Spark Plugs on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you start, open the bonnet of your Ford Fiesta. Begin by disconnecting the connectors attached to the spark plug leads. Next, unscrew and remo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos