Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Trim Replacement

Model: Ford Ranger MK 2 - Years 1993-1997
Part: Trim cover

If the front trim is broken, it can be replaced with a simple operation. Remove the fixing screws of the front trim located in the engine bay and underneath the bodywork. Once this is done, completely remove the old trim, including the bumper. Dismantle the various accessory parts from the old trim, including the manufacturer's logo, by unscrewing the corresponding bolts at the back. Refit the parts previously removed onto the new trim. Carefully position the trim in its housing and reinsert all the screws that were removed earlier.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Air Filter Replacement
Engine Air Filter Replacement
Ford Ranger (1993-1997 / MK 2) Once you open the front bonnet, the engine air filter housing is located at the front left (when facing the vehicle) just behind the headlamp. The fi…
How to disassemble the front door panel of the Ford Ranger
How to disassemble the front door panel of the Ford Ranger
Ford Ranger (2011-2023 / T6, PX, P375) The following steps will show us how to disassemble and remove the front door panel of the Ford Ranger. First, we open the front door of the vehicle …
Removal of interior lights ceiling on Ford Ranger T6-T7
Removal of interior lights ceiling on Ford Ranger T6-T7
Ford Ranger (2015-2019 / ) In this video we will see how to disassemble the ceiling lights of the passenger compartment and how to replace the bulbs on a Ford Ranger T6 and T7,…

Other guides you may be interested in

How to Replace the Windscreen Wiper Pump on a Fiat Panda

Do you want to remove the faulty windscreen wiper pump? Let's see in this detailed video how to proceed on a Fiat Panda. Start by using a socket to remove the bolts located on the side of the headlamp and on the left wing, and finally unscrew the central grille of the Panda. Pull out the left front headlamp, grasp the wiper pump, and disconnect the water hoses and power cables. Connect the new pump to the various hoses and power cables. Before refitting everything, test the correct operation of the pump. For the assembly operations, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos