Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Oil Filter on a Ford B Max

Model: Ford B Max MK 1 - Years 2012-2018
Part: Diesel fuel filter

Need to replace the oil filter on a Ford B Max? Let's see how to remove it from inside the engine bay. Open the car door and pull up the engine bay release lever located at the bottom left of the dashboard, then lift the front bonnet. Remove the soundproofing panel if you have difficulty reaching the filter. Unscrew the tightening screws of the metal clamp on the ventilation pipe (if located above the oil filter). Remove the securing pin from the container that holds the oil filter. Extract the worn filter from the engine bay. Install the new oil filter with all its associated parts.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Cabin Filter on a Ford B Max
Replace Cabin Filter on a Ford B Max
Ford B Max (2012-2018 / MK 1) Replace the cabin air filter on a Ford B Max, here's how to do it. The cabin filter is located at the bottom left of the glove compartment. Use a pla…
Reset Oil Light on a Ford B Max
Reset Oil Light on a Ford B Max
Ford B Max (2012-2018 / MK 1) How to reset the oil light on a Ford B Max? Let’s look at the reset procedure. Enter the Ford vehicle and turn on the instrument panel, then locate t…
How to Replace the Fan Resistor on a Ford B-Max
How to Replace the Fan Resistor on a Ford B-Max
Ford B Max (2012-2018 / MK 1) Before you begin, open the front passenger door of your Ford B-Max. Start by removing the panel located at the bottom of the centre tunnel. Next, dis…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos