Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Key

Start by removing the physical emergency key from the electronic key of your Ford Kuga, which will open a slot. Then insert the tip of the emergency key into the slot and lever it open. This will split the electronic key in two, allowing you to access the exhausted battery. Proceed to remove it. To take out the battery, simply extract it, and you will have completed the disassembly. To fit the new battery and close the key, simply repeat these steps in reverse order, and you will have successfully completed the replacement.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Ford Kuga key
How to replace the battery of the Ford Kuga key
Ford Kuga (2020-2026 / MK 3) Before discovering how to correctly replace the battery in the key of your Ford Kuga Mk3, make sure you have a small flathead screwdriver and, of cou…
How to Replace the Remote Battery in the Ford Kuga?
How to Replace the Remote Battery in the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) As seen in this tutorial, replacing the remote battery in the Ford Kuga is an extremely simple and quick operation. You will need a replacement CR203…
How to Replace the Key Battery in a Ford Kuga
How to Replace the Key Battery in a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) To replace the button battery inside your Ford Kuga key (first series, 2008-2012), follow these steps. First, ensure you have a flat-head screwdriver…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos