Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Routine maintenance on a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Oil filter

As shown in the video, unscrew the cap for the oil drain hole and collect the oil in a container. After removing the lower cover, you can also unscrew the oil filter by hand. Oil will obviously come out from here as well. While draining the oil, move to the top of the engine bay and unscrew the three 8 mm bolts that secure the fuel filter cover, then disconnect the hoses and wires. Unscrew the fuel filter and fit the new one. After that, screw in the new oil filter and refill the lubricant from the engine bay.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Perform Maintenance on Your Ford Kuga
How to Perform Maintenance on Your Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) How to perform maintenance on your Ford Kuga? This video explains how to replace the battery. Open the car door and pull up the engine compartment re…
How to reset the service light on the Ford Kuga.
How to reset the service light on the Ford Kuga.
Ford Kuga (2012-2019 / C520, MK 2) To reset the service light on a Ford Kuga vehicle, it is important that the necessary maintenance operations have been performed in the workshop for …
Resetting the Service Light on a Ford Kuga
Resetting the Service Light on a Ford Kuga
Ford Kuga (2020-2026 / MK 3) Today we will see the instructions that will allow us to reset the service light for regular maintenance on the Ford Kuga. First, get into the vehicl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos