Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Maintenance Light on Ford Kuga

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012
Part: Warning light – error code

See other generations:
Video tutorial

Have you changed the engine oil on your first generation Ford Kuga (2008-2012) but the maintenance light remains on? Don't worry, this brief tutorial will show you how to reset this light in just a few simple steps. Start by turning on the ignition without starting the engine, then press and hold both the brake and accelerator pedals simultaneously.

You will see a reset notification appear on the speedometer display, continue holding both pedals for about 15-20 seconds until the reset notification completes.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a Ford Kuga
Ford Kuga (2020-2026 / MK 3) In this brief video tutorial, you will learn how to reset the maintenance light on a 2020 Ford Kuga with a 1.5 TDCi engine producing 120 bhp. To star…
How to Reset the Service Indicator on a Ford Kuga
How to Reset the Service Indicator on a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) To reset the service indicator on a Ford Kuga, follow these simple steps. Enter the vehicle, put it in neutral, and turn on the ignition. Press the a…
Instructions to Reset the Service Light on a Ford Kuga
Instructions to Reset the Service Light on a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) In this video tutorial, you will find instructions on how to reset the service light for the routine maintenance oil change of a first-generation For…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the message "Fuel computer data error" indicate in the Ford Kuga? Read answer
    • Kuga 2008-2012 - What can cause the Ford Kuga engine warning light to come on? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos