Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel Airbag on Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Airbag

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the steering wheel airbag from a second-generation Ford Kuga. First, get inside the car and turn the steering wheel 90 degrees, first to one side and then to the other: this will give you access to the two screws to be unscrewed with a Torx spanner.

At this point, you can extract the airbag, disconnecting the electrical connector on the back; the removal of the steering wheel is also demonstrated.

For reassembly, simply follow the reverse procedure of disassembly!


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to turn off the airbag warning light on a Ford Kuga MK2
How to turn off the airbag warning light on a Ford Kuga MK2
Ford Kuga (2012-2019 / MK 2, C520) In this video, we can see how to reset the airbag warning light on a Ford Kuga, but the same system applies to any other Ford vehicle. Naturally, thi…
How to remove the airbag from the steering wheel of a Ford Kuga MK2
How to remove the airbag from the steering wheel of a Ford Kuga MK2
Ford Kuga (2012-2019 / MK 2, C520) In this video, we see how to remove the airbag module from the steering wheel of a Ford Kuga MK2. In this case, the operation is shown on a workbench…
Where to Find the Fuses in the 2015 Ford Kuga
Where to Find the Fuses in the 2015 Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) Inside the 2015 Ford Kuga II model, there are two fuse boxes. The first fuse box is located under the front bonnet next to the battery. Inside, you w…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos