Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Engine Oil Filter Cartridge

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Oil filter

See other generations:
Video tutorial

First, locate the oil filter as shown in the video. The filter is housed in a capsule with a bolt on top. Insert the appropriate tool and loosen the filter housing.

Continue unscrewing by hand until you remove the capsule containing the filter. On your workbench, extract the filter from the capsule.

Clean the inside of the filter housing you just unscrewed and also the filter housing in the engine. Remove the old gasket and, using a little oil, slide the new gasket onto the filter housing.

Insert the new filter and hand-tighten the capsule before securing it with the tool, but do not overtighten. Add engine oil until nearly at the level, then run the engine for a few minutes and make a final oil top-up if necessary.

Required tools: T-bar or ratchet with a 27mm extension.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Ford Mondeo / Fusion (2000-2007 / MK 2) Lift the car and secure it with appropriate supports to prevent it from falling. The necessary tools are a ratchet spanner, a set of fixed spanners, …
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Ford Mondeo / Fusion (2000-2007 / MK 2) Lift the vehicle and secure it with appropriate supports to prevent it from falling. The necessary tools are a ratchet, a set of spanners, a special …
Engine Oil and Oil Filter Replacement
Ford Mondeo / Fusion (2007-2014 / MK 3) Lift the car and secure it with appropriate supports so it cannot fall. The necessary tools are a ratchet spanner, a set of fixed spanners, a special…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos