Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pedal Return Spring on a Ford.

Model: Ford Ford Various
Part: Clutch

Video tutorial

In this guide, you will learn how to replace the return spring of the clutch on a Ford Focus. First, remove the panel located under the steering wheel; once removed, disconnect the bonnet release cable and the diagnostic cable (highlighted in red in the video).

For better access to the pedal area, it is advisable to remove the driver's seat. After completing these preparatory steps, you need to undo the 4 nuts of the brake-clutch block (two upper and two lower).

At this point, you can work on the spring; pull it out by pushing it backwards to detach the hook and remove it. Replace it with the new one, ensuring that the hook fits properly into the designated space, both at the back and on the pedal (shown at minute 1:10). Once this operation is complete, you can proceed with reassembly, ensuring that all bolts and cables are correctly reattached.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

The issues of the 1st generation Ford Powershift automatic transmission.
The issues of the 1st generation Ford Powershift automatic transmission.
Ford Ford Various In this video we talk about the first generation Ford Powershift automatic transmission: the most serious problem is caused by the clutch pack which …
How to replace the battery in the Ford key
How to replace the battery in the Ford key
Ford Ford Various Three simple steps make up the procedure for replacing the Ford key battery. The first step is to unscrew the screw located behind the remote control…
How to replace the battery in a Ford key.
How to replace the battery in a Ford key.
Ford Ford Various When the key of a vehicle stops working, it is very likely that the key battery needs to be replaced, this operation is very simple to perform indepe…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos