Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ka
    4. : Ford Ka 1.3 44 kW Duratec 8V thermostat replacement

Ford Ka - Video tutorial

Model: Ford Ka MK 1 - Years 1996-2008
Part: Thermostat
Operation: Ford Ka 1.3 44 kW Duratec 8V thermostat replacement

In this tutorial we will see how to disassemble and replace the thermostat of a Ford Ka 1.3 44 kW Duratec 8V. First we open and lift the bonnet of our car and we go to remove the battery, disconnecting the terminals (positive and negative pole); after which we remove the battery holder, unscrewing the screws, and the air filter box; then disconnect the electrical connector of the thermostatic valve and disconnect the thermostat tube, draining all the liquid contained inside. We just have to unscrew the fixing screws of the same to remove and replace it!


Posted on 23 March 2024 by ScegliAuto



Replacing the thermostat on Ford Ka
Ford Ka (2008-2016 / MK 2) We see the disassembly of the thermostat on a Ford Ka with its related parts. We open the front hood, remove the plastic covers that cover the thermo
How to replace the thermostat on a Ford Ka
Ford Ka (1996-2008 / MK 1) Before we can start, we will necessarily have to open the hood of the car. Please note, this operation must only be carried out with a cold engine. O
How to replace the rear light bulb on the Ford Ka?
Ford Ka (2008-2016 / MK 2) The replacement of the rear light bulb of the Ford Ka is carried out by opening the tailgate of the luggage compartment, so that the screws located n

Other guides that may interest you

    Frequently Asked Questions

    • Ka 2008-2016 - How much does the thermostatic block of a ford ka cost? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos