Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ecosport
    4. : Reset Ford Ecosport (2016) engine oil change light

Ford Ecosport - Video tutorial

Model: Ford Ecosport MK 1, BK - Years 2012-2023
Part: Engine
Operation: Reset Ford Ecosport (2016) engine oil change light

Today we see how to go to reset the Ecosport engine oil change light. I would like to remind you that replacing the engine oil annually or based on the mileage traveled ensures greater operation over time, reduces engine wear and reduces the release of pollutants into the atmosphere. That said, let's proceed. Let's make sure the doors are closed. We turn on the ignition but do not start the engine. Let's press the brake and accelerator at the same time and keep them pressed until the reset message appears on the screen. Now we release the pedals and go to turn off the ignition. We wait about 2 minutes and turn on the panel again to check if the service message reappears. If the procedure was successful, we can turn off the ignition.


Posted on 26 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Ecosport 2012-2023 - What are the most common engine problems in the Ford Ecosport? Read Answer
    • Ecosport 2012-2023 - What does the "engine light" on my Ford Ecosport diesel mean? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos