Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Ford Escape?

Model: Ford Escape MK 2 - Years 2008-2012
Part: Spark plugs

To replace the spark plugs on a Ford Escape, open the hood and remove some components in the engine bay, such as the air filter box. This will allow you to detach the plastic panel on top of the engine block, so you can disconnect the connectors attached to the coils underneath. Once the coils are free, you can pull them out of their housing to access the spark plugs below, which need to be removed with a socket wrench. After replacing the spark plugs, reinstall all the components that were removed.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Lower Headlight in a Ford Escape?
How to Replace the Lower Headlight in a Ford Escape?
Ford Escape (2013-2019 / MK 3) In this tutorial, you will see how to replace the lower front headlight in a Ford Escape, which includes the fog lights, position lights, and turn si…
How to Reset the Service Light on a Ford Escape?
How to Reset the Service Light on a Ford Escape?
Ford Escape (2013-2019 / MK 3) To reset the Service light on a Ford Escape, turn the ignition key in the ignition switch to the ON position to light up the instrument cluster. Once…
How to Reset the Oil Change Light on a Ford Escape?
How to Reset the Oil Change Light on a Ford Escape?
Ford Escape (2013-2019 / MK 3) To reset the Oil Change light on a Ford Escape, enter the cabin and press the accelerator and brake pedals simultaneously. While holding these pedals…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos