Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Transit
    4. : How do you change the Ford Transit engine oil?

Ford Transit - Video tutorial

Model: Ford Transit MK 8 - Years 2014-2023
Part: Engine oil
Operation: How do you change the Ford Transit engine oil?

In order to change the Ford Transit engine oil, you must go to the lower part of the engine compartment, where the oil tank drain plug will be located. Once this cap has been unscrewed, a container must be placed under the drain hole to collect all the used oil inside. Once all the oil has completely flowed out, it will be possible to close the drain plug and open the hood. Here, inside the engine compartment, you will find the filler cap, which will need to be removed so that the new engine oil can be inserted.


Posted on 22 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Transit 2006-2014 - How many liters of oil should be inserted into the Ford Transit 2011? Read Answer
    • Transit 2006-2014 - How many liters of engine oil are needed for the Ford Transit 2.2 diesel? Read Answer
    • Transit 2006-2014 - How many liters of engine oil are needed to change on the Ford Transit Mk7 3.2? Read Answer
    • Transit 2006-2014 - What is the right amount of engine oil for the Ford Transit 2.5? Read Answer
    • Transit 1994-2000 - How much engine oil is needed in a naturally aspirated Ford Transit 2500? Read Answer
    • Transit 2014-2023 - How many liters of engine oil goes in the Ford Transit Custom? Read Answer
    • Transit 2000-2006 - How many liters of engine oil does the Ford Transit van contain? Read Answer
    • Transit 2006-2014 - How much oil do you need for replacement on the Ford Transit2.2 Tdci? Read Answer
    • Transit 2006-2014 - How much oil does the Ford Transit engine contain? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos