Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Transit
    4. : How do you replace the engine oil of the Ford Transit?

Ford Transit - Video tutorial

Model: Ford Transit MK 8 - Years 2014-2023
Part: Engine oil
Operation: How do you replace the engine oil of the Ford Transit?

The oil change for the Ford Transit is done by loosening the drain plug on the oil tank, which is located on the bottom of the vehicle. Once the plug has been loosened, all the old oil must be collected in a properly positioned container. After the oil has drained, the drain plug can be closed and the oil filter next to the tank can be removed. The new filter can then be inserted, and the necessary amount of oil can be added through the appropriate opening under the hood.


Posted on 8 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Transit 2006-2014 - How many liters of oil should be inserted into the Ford Transit 2011? Read Answer
    • Transit 2006-2014 - How many liters of engine oil are needed for the Ford Transit 2.2 diesel? Read Answer
    • Transit 2006-2014 - How many liters of engine oil are needed to change on the Ford Transit Mk7 3.2? Read Answer
    • Transit 2006-2014 - What is the right amount of engine oil for the Ford Transit 2.5? Read Answer
    • Transit 1994-2000 - How much engine oil is needed in a naturally aspirated Ford Transit 2500? Read Answer
    • Transit 2014-2023 - How many liters of engine oil goes in the Ford Transit Custom? Read Answer
    • Transit 2000-2006 - How many liters of engine oil does the Ford Transit van contain? Read Answer
    • Transit 2006-2014 - How much oil do you need for replacement on the Ford Transit2.2 Tdci? Read Answer
    • Transit 2006-2014 - How much oil does the Ford Transit engine contain? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos