Do it yourself
| ||||
|
Ford Transit - Video tutorial
Model: Ford Transit
MK 8
- Years 2014-2023 In this video we will find out how to change the engine oil of a Ford Transit. To start we will have to act under the vehicle, at the height of the bonnet, on the passenger side to unscrew the appropriate bolt. Before doing this, it is necessary to prepare a container to collect the oil that will begin to come out during the unscrewing operation. We let the oil out for a few minutes. At this point we unscrew the filter to extract it, to let the oil come out also from this part of the car. After that, let's replace the filter. Now we can pour the new oil into the special nozzle on the engine. Finally, to eliminate the engine change warning, we turn on the ignition and press the accelerator pedal and the brake pedal at the same time.
Posted on 29 June 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.031
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |