Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Screenwash in a Ford Fusion

Model: Ford Fusion MK 1 - Years 2002-2012

If the screenwash level is too low (or even completely empty) in the reservoir of your Ford Fusion, it is time to top it up. First, switch off the car and allow the engine to cool sufficiently. Then, unlock the bonnet and lift it fully. Locate the small screenwash reservoir on the left side of the engine bay and unscrew the cap. At this point, pour in the new screenwash and finally, screw the cap back on by turning it clockwise.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Horns on Ford Fusion
Replacing the Horns on Ford Fusion
Ford Fusion (2002-2012 / MK 1) On the Ford Fusion, the manufacturer has positioned the horns behind the windscreen washer reservoir and near (in front of) the front passenger wheel…
How to find the fuse diagram for a Ford Fusion
Ford Fusion (2002-2012 / MK 1) In this tutorial, you will see the diagram related to the fuses present in a Ford Fusion car. The first fuse box is located inside the vehicle's cabi…
Replacing the Timing Belt on the Ford Fusion 1.4 TDCi
Replacing the Timing Belt on the Ford Fusion 1.4 TDCi
Ford Fusion (2002-2012 / MK 1) Replacing the timing belt is a procedure that requires a lot of patience and particular attention; let's see how to carry out the replacement on the …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos