Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the cabin air filter in the Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Cabin air filter
Operation: How to replace the cabin air filter in the Ford Focus

In today's video we will see how to replace the cabin air filter in the Ford Focus. First we remove the plastic panel in the driver's side footwell. Now let's proceed to remove the accelerator pedal. At this point we can find in front of us the plastic cover that hides the air filter; we then extract the old unit. We proceed with the installation of the new piece following the instructions given above then to reassemble everything as before. Operation completed. We recommend replacing it once every 12 months, especially if you drive a lot in the city.


Posted on 11 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - Where is the cabin filter on the Ford Focus located? Read Answer
    • Focus 2004-2011 - Where is the cabin air filter located on the Ford Focus MK2? Read Answer
    • Focus 2011-2018 - Where is the Ford Focus pollen filter located? Read Answer
    • Focus 2018-2025 - Where is the cabin filter located on my 2019 Ford Focus? Read Answer
    • Focus 2011-2018 - Where is the Ford Focus 1.6 cabin air filter located? Read Answer
    • Focus 1998-2004 - Where is the air conditioning cabin filter Ford Focus 3rd series Read Answer
    • Focus 1998-2004 - Where is the cabin filter of the Ford Focus I? Read Answer
    • Focus 2004-2011 - Where do you find the Ford Focus II cabin air filter? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos