Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Alternator

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Alternator

See other generations:
Video tutorial

Before proceeding to remove the alternator, disconnect the negative terminal of the battery to avoid any shorts. The alternator is located on the timing belt side, at the rear, and to remove it, you must first take off the coolant reservoir and the power steering fluid reservoir.

Then, slip off the auxiliary belt by loosening the tensioner, disconnect the cables, and unscrew the alternator mounting bolts to extract it from its housing. Install the new alternator (you can always opt for a refurbished one) after checking its compatibility (voltage, amperage, diameter, and number of grooves on the pulley).


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacing the Car Alternator
Replacing the Car Alternator
Ford Focus (1998-2004 / MK 1) The car alternator is a device that provides between 13 and 18 volts to power the electronic and starting systems. You can save money on the alternat…
Alternator Replacement Instructions
Ford Focus (1998-2004 / MK 1) The alternator is located at the front left (when facing the engine), just above the air conditioning compressor; to remove it easily, it is suggeste…
Replacing Alternator on Ford Focus
Replacing Alternator on Ford Focus
Ford Focus (2011-2018 / MK 3) Replacing the alternator on a Ford Focus? First, disconnect the battery terminals. Locate the power battery and disconnect the terminals. Remove the …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos