Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. C Max
    4. : How to remove the oil warning light in Ford C-MAX Hybrid?

Ford C Max - Video tutorial

Model: Ford C Max MK 2 - Years 2010-2019
Part: Engine oil
Operation: How to remove the oil warning light in Ford C-MAX Hybrid?

In this tutorial we can see how to reset the engine oil light in the Ford C-MAX Hybrid, a very simple and fast operation, to be carried out only after completing all the scheduled maintenance operations. First of all let's go inside the passenger compartment, insert the key and turn on the instrument panel, not the engine. Subsequently, fully press the brake and accelerator pedals and hold them in position for about 30 seconds, or in any case for the time necessary for the engine light to flash and then disappear together with the oil service light. Finally, we restart the vehicle.


Posted on 2 December 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C Max 2010-2019 - Engine oil warning light on Ford C Max, what to do? Read Answer
    • C Max 2003-2010 - How much oil should you put in a Ford C-Max 1.6 TDC? Read Answer
    • C Max 2010-2019 - How much oil does a Ford C Max 2.0 need? Read Answer
    • C Max 2003-2010 - How many liters of oil go into the engine of a Ford C-Max 1.6 TDCi? Read Answer
    • C Max 2010-2019 - How much does the service cost of the Ford Cmax? Read Answer
    • C Max 2010-2019 - How many liters of oil go into the Ford Cmax engine? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos