Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on a Ford Fusion?

Model: Ford Fusion North America MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the engine oil service light on a Ford Fusion. This is a very simple and quick operation that should only be done after completing all required maintenance work.

First, turn on the ignition. Then, press the "OK" button located on the left side of the steering wheel.

In the menu that appears, go to "Settings" and then to "Vehicle." At this point, select "Oil life reset" and perform the complete reset by choosing "Set to 100%." Finally, return to the main screen and verify that the operation was successful.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Oil Change Light on the Ford Fusion
How to Reset the Engine Oil Change Light on the Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) In just a few short steps, we will go through the procedure to reset the engine oil change service light on the Ford Fusion. First, get in the vehicl…
How to Reset the Oil Light on a 2016 Ford Fusion
How to Reset the Oil Light on a 2016 Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) In this guide for your 2016 Ford Fusion, learn how to reset the engine oil light. First, get inside the vehicle and reach the driver's seat. Then, tu…
Resetting the Oil Change Light on Ford Fusion Hybrid
Resetting the Oil Change Light on Ford Fusion Hybrid
Ford Fusion North America (2013-2020 / MK 2) Let's see how to reset the oil change light on a Ford Fusion Hybrid, model produced from 2013 to 2020, using the controls on the left side of the ste…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos