Do it yourself
| ||||
|
Ford Fusion North America - Video tutorial
Model: Ford Fusion North America
MK 2
- Years 2013-2020 In a few short steps, we will see how to reset the service maintenance light for the engine oil change on a Ford Fusion. First, we get into the car and start the instrument panel; then we use the controls on the steering wheel to access the settings menu on the onboard computer, as shown in the video. Next, we go to the engine oil section and confirm the reset of the service light; then make sure that the oil life is at 100% and that the remaining miles before the next service are reset!
Posted on 26 February 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.038
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |