Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. F-150
    4. : How to change the front grille on the Ford F150

Ford F-150 - Video tutorial

Model: Ford F-150 MK 11 - Years 2004-2008
Part: Grille
Operation: How to change the front grille on the Ford F150

To change the front grille of the Ford F150, it is recommended to spray some WD-40 on the screws that hold the grille in place, so that they can be better unscrewed. Of course, these are plastics that have suffered the ravages of time. In our case they are from 2005, so they inevitably broke, but it doesn't matter, they will be replaced. The new front has a beautiful golden color that stands out against the dark body color. You can find this and other similar fronts on 1aauto. Com. We can easily attach it to the front of the pick-up using the 10 mm screws. Last touch is to reattach the blue oval to the center of the grid. The work is done.


Posted on 3 September 2022 by ScegliAuto



How to disassemble the front fender of the Ford F150 Mk13
Ford F-150 (2015-2020 / MK 13) This guide shows how to disassemble the front bumper of the Ford F150 Mk13. After securing the vehicle, disconnect the negative terminal of the batte
How to change the key battery of a Ford F150
Ford F-150 (2015-2020 / MK 13) In this tutorial we see how to replace the low remote control battery on Ford F150. We take our remote control we open the key, we will see a hook be
How to change the low beam bulb on the Ford F150
Ford F-150 (2015-2020 / MK 13) To change the Ford F150 headlight bulb, proceed as follows: remove the 3 clips that hold the bodywork protection that surrounds the headlight and dis

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos