|
Do it yourself
| |||
| ||||
How to reset the Ford Ecosport service light
Model: Ford Ecosport
BK, MK 1
- Years 2012-2023
The procedure required for resetting the Ford Ecosport service light is really simple and can be performed by anyone. The steps to follow are few and you just need to carefully follow the following instructions. First insert the key and just turn on the ignition (you don't have to start the engine too). Immediately afterwards, keep both the accelerator pedal and the brake pedal depressed at the same time. At this point the service light will start flashing. As soon as it stops doing this, release the two pedals and the reset is complete. In case of errors you can safely repeat the operation.
Posted on 8 September 2022 by ScegliAuto
This video is currently unavailable
Related tutorials
Ford Ecosport
(2012-2023 /
BK, MK 1)
On the Ford Ecosport, the service light reset operation is performed by inserting the ignition key and turning it to turn on the instrument panel. On…
Ford Ecosport
(2012-2023 /
BK, MK 1)
In today's video we will see how to reset the service warning light in the Ford Ecosport, after performing a service. This warning light comes on onc…
Ford Ecosport
(2012-2023 /
BK, MK 1)
To completely make the Service light disappear from the instrument panel of the Ford Ecosport, you will need to insert the ignition key into the igni…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.114
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
