Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part: Battery

The video illustrates how to replace the battery in a Ford Escape. It is a fairly simple procedure. As the first step, ensure that the vehicle is off, engage the parking brake, and open the engine compartment using the appropriate lever. The battery box is located on the right side, in a somewhat awkward position. As the first step, it is advisable to remove the plastic cover that obstructs access by unscrewing the securing screws. First, remove the negative terminal and then the positive terminal, first removing the securing screws that hold the clamps.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Ford Escape V6
How to Replace the Battery in a Ford Escape V6
Ford Escape (2008-2012 / MK 2) Today, discover the steps to remove and replace the battery in a Ford Escape V6 by following the instructions below. First, open the hood of your veh…
How to replace the battery of the Ford Escape - Kuga
How to replace the battery of the Ford Escape - Kuga
Ford Escape (2020-2026 / MK 4) In this guide, we will see step-by-step instructions on how to disassemble and replace the battery of the Ford Escape, as well as the Kuga. First, op…
How to Replace the Battery in a Ford Escape?
How to Replace the Battery in a Ford Escape?
Ford Escape (2008-2012 / MK 2) To replace the battery in a Ford Escape, lift the hood to access the engine compartment. The battery is located near the left headlight; to remove it…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos