Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset Tyre Pressure on a Ford Puma

Model: Ford Puma MK 1 - Years 2019-2026
Part:

Resetting the tyre pressure warning light on a Ford Puma Hybrid is very simple. After getting into the vehicle and closing all four doors, turn on the ignition without starting the engine. Use the controls on the right side of the steering wheel to scroll through the menu with the designated button until you reach "settings"; then select "Vehicle" and subsequently "Tyre pressure": The menu will prompt "Hold "Ok" to store". Simply confirm with the central button on the satellite control on the right (where you have been operating the "menu" button). Operation completed.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light in the Ford Puma?
How to reset the tire pressure warning light in the Ford Puma?
Ford Puma (2019-2026 / MK 1) In this tutorial, we can see how to reset the tire pressure light in the Ford Puma, an extremely simple and fast operation, to be performed only once…
How do you reset the tire pressure warning light in the Ford Puma?
How do you reset the tire pressure warning light in the Ford Puma?
Ford Puma (2019-2026 / MK 1) The tire pressure in the Ford Puma can be checked and corrected using the kit provided. If any anomalies are detected in the tires, the dashboard war…
How to reset the tire pressure light in the Ford Puma?
How to reset the tire pressure light in the Ford Puma?
Ford Puma (2019-2026 / MK 1) In this tutorial we can see how to reset the tire pressure light in the Ford Puma, an extremely simple and quick operation, to be carried out only on…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos