Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Which Bulbs are Fitted in the Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Headlight bulb

In this video tutorial, you can see which bulbs are fitted in the Ford Kuga by following a few simple steps. The headlamp bulb kit used is model 78 07. First, remove the headlamp to work more easily. Once the headlamp is removed, take the bulb and detach the retaining ring. Attach the ring to the headlamp holder as if it were a standard bulb. Next, fit the new bulb into place and connect the connector to the control unit (IP65 control unit). The product features a creeck with dual LED and a gold body, and is approved. Now, position everything back inside the headlamp. You can now refit the headlamp to your vehicle.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulbs of the Rear Light on a Ford Kuga
How to Replace the Bulbs of the Rear Light on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Do you want to change the bulbs of the rear light on a Ford Kuga but don't know how to proceed? No problem, let's see how to do it: open the rear hat…
Replacing Front Headlight Bulb on Kuga
Replacing Front Headlight Bulb on Kuga
Ford Kuga (2012-2019 / C520, MK 2) Let's see how to remove the headlight bulbs from a Ford Kuga. Lift the front bonnet of the car and secure it. Remove the inspection cap from the head…
How to Change the Headlight Bulb on a Ford Kuga
How to Change the Headlight Bulb on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Replacing damaged front headlight bulbs on a Ford Kuga? Here’s how to do it. Open the access panel, pull the bonnet release lever; lift the bonnet an…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos