Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Kuga
    4. : How do you reset the Ford Kuga oil light?

Ford Kuga - Video tutorial

Model: Ford Kuga MK 2, C520 - Years 2012-2019
Part: Checks and maintenance
Operation: How do you reset the Ford Kuga oil light?

In order to reset the Ford Kuga oil light, you need to insert the key into the appropriate ignition lock, so that you can then go and press the button to turn on the instrument panel. Once the ignition is on, the oil warning light will appear: by holding down the brake and accelerator pedals at the same time, a message will appear on the display confirming that the warning light has been reset after a certain period. When this message has appeared, the instrument panel will have to be switched off, so that it can be switched on again by checking that the warning light has been reset.


Posted on 20 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the label "Normal mode" indicate on the Ford Kuga? Read Answer
    • Kuga 2020-2027 - What to do if the start & stop of the Ford Kuga is not working? Read Answer
    • Kuga 2008-2012 - Why does the message "fuel data error" appear on the Ford Kuga? Read Answer
    • Kuga 2012-2019 - What does the message "Fuel computer data error" indicate in the Ford Kuga? Read Answer
    • Kuga 2020-2027 - What are the main problems of the Ford Kuga? Read Answer
    • Kuga 2020-2027 - What to do if the Ford Kuga does not open? Read Answer
    • Kuga 2020-2027 - When should the Ford Kuga be serviced? Read Answer
    • Kuga 2020-2027 - What does the warning light indicating that tire pressure sensors are not detected on a Ford Kuga mean? Read Answer
    • Kuga 2008-2012 - Where does the Ford Kuga navigation SD card go? Read Answer
    • Kuga 2012-2019 - Why doesn't my Ford Kuga engine start anymore? Read Answer
    • Kuga 2020-2027 - What problems could the 2019 Ford Kuga present? Read Answer
    • Kuga 2012-2019 - How much is the Ford Kuga service? Read Answer
    • Kuga 2012-2019 - What to do if the Ford Kuga does not start? Read Answer
    • Kuga 2012-2019 - How to remove the engine failure warning light in the Ford Kuga? Read Answer
    • Kuga 2012-2019 - What caused the Ford Kuga central locking problem? Read Answer
    • Kuga 2012-2019 - How to reset the engine failure and service warning light on Ford Kuga? Read Answer
    • Kuga 2012-2019 - What warning lights are orange in the Ford Kuga? Read Answer
    • Kuga 2012-2019 - How many km do you need to service the Ford Kuga? Read Answer
    • Kuga 2020-2027 - How do you start the Ford Kuga? Read Answer
    • Kuga 2012-2019 - How much does it cost to change the timing belt on a Ford Kuga? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos