Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on the Ford Fiesta 1.2 Petrol

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Timing belt

To replace the timing belt on the vehicle, follow these steps: open the bonnet and begin by removing the coolant reservoir. Then, remove the auxiliary drive belt, followed by the alternator and its belt. Next, remove the front right wheel and the brake. Remove the engine mount and the timing belt cover. Mark the relative position of the teeth on the pulleys in relation to the engine. Remove the lower pulley and then extract the belt, and if necessary, replace the water pump. At this point, position the new belt and reassemble all components in reverse order.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt of the Ford Fiesta 1.4
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, we will look at the main steps for dismantling and replacing the timing belt of the Ford Fiesta 1.4 petrol. First, open the bonnet and begin t…
Replacing the Timing Belt on the Ford Fiesta 1.6
Replacing the Timing Belt on the Ford Fiesta 1.6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, we will discover the procedure for removing and replacing the timing belt on the Ford Fiesta 1.6. First, open the bonnet of the vehicle and st…
When and How to Replace the Timing Belt on the Ford Fiesta 1.5 TDCI
When and How to Replace the Timing Belt on the Ford Fiesta 1.5 TDCI
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, discover how to remove and replace the timing belt on the Ford Fiesta 1.5 TDCI. The manufacturer recommends replacing the timing belt every 10…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos