Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Ford Escape?

Model: Ford Escape MK 3 - Years 2013-2019
Part: Door trim panel

As seen in this tutorial, removing the door panel on a Ford Escape is an extremely simple and quick task. First, remove both the small cap inside the handle and the one on the side edge of the panel. Then, pry out the window switch assembly using a plastic trim tool. Next, unscrew the indicated screws, grasp the panel from both sides, and pull it away from the door using leverage. Finally, disconnect the lock cable along with the speaker connector and install the replacement part by following the reverse procedure.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front door panel of the Ford Escape
How to disassemble the front door panel of the Ford Escape
Ford Escape (2008-2012 / MK 2) In this guide we will see the instructions that will allow us to disassemble the front door panel of the Ford Escape, in simple steps. First, we open…
How to disassemble the front door panel of the Ford Escape
How to disassemble the front door panel of the Ford Escape
Ford Escape (2013-2019 / MK 3) Today we will see the instructions that will allow us to disassemble and remove the front door panel of the Ford Escape, as well as the Kuga. First, …
How to Remove the Front Door Panel of the Ford Escape 2
How to Remove the Front Door Panel of the Ford Escape 2
Ford Escape (2008-2012 / MK 2) Today, you will learn how to remove and replace the front door panel of the second generation Ford Escape. First, open the front door and start by re…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos