Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Explorer

Model: Ford Explorer MK 3, U152 - Years: 2002, 2003, 2004, 2005
Part: Service warning light

See other generations:
Video tutorial

In this video tutorial, you will see how to reset the service light on a Ford Explorer. First, you need to change the engine oil and filters.

Next, get inside the vehicle, insert the key, and turn on the ignition. Press the SETUP button located to the left of the radio; at this point, the display will show the message (PRESS RESET TO CLEAR), so you need to press the RESET button.

Then, continue pressing SETUP and RESET until you reset the oil change message, then hold the button for a few seconds to confirm. Turn off the ignition and turn it back on to check that the reset was successful.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to reset the service light on the 2002 Ford Explorer
How to reset the service light on the 2002 Ford Explorer
Ford Explorer (2002-2005 / MK 3, U152) Today, you will learn how to reset the service light on the 2002 Ford Explorer. The first step is to enter the cabin and turn on the instrument clust…
How to reset the oil service on the Ford Explorer?
How to reset the oil service on the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this tutorial, you will see how to reset the oil service on the Ford Explorer, a very simple and quick operation to perform only after completing …
How to reset the service light on the 2022 Ford Explorer
How to reset the service light on the 2022 Ford Explorer
Ford Explorer (2020-2026 / MK 6, U625) Today we will explain how to reset the service light on a 2022 Ford Explorer. To reset the service light, we need to turn on the instrument panel and…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos