Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on a Ford Transit

Model: Ford Transit MK 4 - Years 1986-1994
Part: Timing belt

In this video tutorial, see how to replace the timing belt on a Ford Transit by following some simple steps: the first thing to do is remove the front grille and the radiator. To remove the front grille, you need to take out all the fastening elements; once the grille is removed, drain the hoses through the tap, then remove the radiator hoses. Use a 10 mm Allen key to remove the radiator fastening elements and then take out the radiator. Once the radiator is removed, you need to take off the cross member. Next, undo the fan nut counterclockwise with a 32 mm spanner. Then remove the two pulleys with a 10 mm socket; undo the bolts of the belt tensioner; remove the water pump. Clean with sandpaper and position the new pump gasket. Install the new belt ensuring it sits correctly on the teeth (the arrow pointing right).

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (2006-2014 / MK 7) Below we will discover the useful information for disassembling and replacing the timing chain on the Ford Transit 2.2 TDCi. To access the timing cha…
Ford Transit (2014-2024 / MK 8) Today's information will show you how and when to remove the timing belt on a Ford Transit, following the instructions below; on this type of engine,…
Ford Transit (1994-2000 / MK 5) In today's tutorial video, we will see the main instructions to remove and replace the timing belt on the Ford Transit. First, open the bonnet and st…

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2014-2024 - How many km do you change the Ford Transit timing chain? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos