Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil on a Ford F250

Model: Ford F-250 P473 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil and filter, follow the instructions below and refer to the video. First, open the hood and remove the oil fill cap. Then, lift the vehicle, locate the drain plug, and unscrew it after placing a container to catch the used oil. Wait a few minutes for all the oil to drain out, then reinstall the plug.

Next, locate the oil filter and unscrew it using the appropriate wrench, then install the new one after replacing the gasket. At this point, take the container with the new oil and fill the system, then check the level with the dipstick.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Ford F250?
How to Reset the "Service" Light on a Ford F250?
Ford F-250 (2017-2022 / P558) To reset the "Service" light on a Ford F250, turn on the instrument cluster without starting the vehicle. Use the buttons on the steering wheel to na…
Fuse diagram of the 1999 Ford F-250
Fuse diagram of the 1999 Ford F-250
Ford F-250 (1999-2007 / Phn131) In the video at the bottom of the article, the fuse diagram and the location of the fuse box for the 1999 Ford F250 are shown. You can pause the vide…
How to Remove the Tail Light Assembly on a Ford F250 P473 to Replace the Reverse Bulb
How to Remove the Tail Light Assembly on a Ford F250 P473 to Replace the Reverse Bulb
Ford F-250 (2011-2016 / P473) This guide shows how to remove the tail light assembly on a Ford F250 P473 to replace the reverse bulb. First, secure the vehicle and open the bed ac…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos