Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Remote Key Battery on a Ford C-Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

To replace the battery in the key for this car model, follow the instructions below and refer to the video. You will need a small screwdriver and a new CR 2032 battery.

Use the small screwdriver to pry open the back of the key, then remove the back cover and take out the old battery from its housing, replacing it with the new one. Finally, refit the back cover and reinsert the back of the key into its housing.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

How to Change the Battery in the Ford C-Max Titanium Remote?
How to Change the Battery in the Ford C-Max Titanium Remote?
Ford C Max (2010-2019 / MK 2) If pressing the buttons on the remote key does not open or close the locks, it is likely that the battery inside the remote has discharged: replacing…
Replacing the Front Headlight Bulbs on a Ford C-Max MK2
Replacing the Front Headlight Bulbs on a Ford C-Max MK2
Ford C Max (2010-2019 / MK 2) If one of the front headlight bulbs on your Ford C-Max burns out, replace it as soon as possible for safe driving. To replace the bulb, open the bonn…
Installing Dynamic Indicators on a Ford C-Max
Installing Dynamic Indicators on a Ford C-Max
Ford C Max (2010-2019 / MK 2) In this video, see how to install dynamic indicators on the side mirrors of a Ford C-Max, replacing the traditional direction indicators. Using the a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos