|
Do it yourself
| |||
| ||||
How to Reset the TCM in a Ford F-150 Raptor
Model: Ford F-150
MK 13
- Years 2015-2020
In this video tutorial, you will see how and when to reset the Transmission Control Module (TCM) in a Ford F-150 Raptor. One of the key components of a vehicle's transmission is the TCM, which interprets electrical signals from sensors in other parts of the vehicle, including the accelerator pedal input, position sensor, throttle valve, and turbine speed. If you haven't noticed any issues while driving, there's no need to reset the TCM. However, you should perform the reset if you notice that the transmission slips into a different gear; when you have your foot on the accelerator and your vehicle takes longer to accelerate than usual; or if your vehicle's fuel doesn't last as long as it normally does. To reset the TCM, follow this procedure: 1) Insert the key into the ignition or use the start button. 2) Put the transmission in neutral. 3) Turn off the vehicle and wait about 20 seconds. 4) Put the vehicle in Park (P) on the transmission. 5) Restart the vehicle but do not fully start the engine. 6) Wait another 20 seconds. 7) Turn off the vehicle and quickly restart it. 8) Shift the transmission into Sport (S) mode or Drive (D). 9) An alarm should sound indicating that the process has been reset. 10) Now you can drive your vehicle.
Updated on 12 July 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Ford F-150
(1992-1997 /
MK 9)
Let's see in this video how to replace the gear knob on a manual Ford F-150: to make the replacement, it will be necessary to put the lever in the fo…
Ford F-150
(2004-2008 /
MK 11)
To replace the shift knob on a Ford F-150, use a screwdriver to pry off the chrome cover at the back of the knob. Once the cover is removed, unscrew …
Ford F-150
(2004-2008 /
MK 11)
To replace the radio in a Ford F-150, pry up the lower part of the climate control panel. This will allow you to detach the control panel that also s…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.171
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |